A high performance data acquisition system, the MP System data acquisition system with AcqKnowledge™ software presents a flexible, easy-to-use modular system made to perform data collection and analyses exactly as you want.

AcqKnowledge™ software is a powerful and flexible package: Record, analyze and filter data in real time, then continue analysis after collection. Data can be plotted in chart-recorder or scope style, as an X-Y diagram and even as a histogram. You can design complex data acquisition, stimulation, triggering and analyses using simple pull-down menus and dialog boxes — no need to learn a new programming language or protocol. The hardware is designed to allow easy amplifier additions and changes so you can customize equipment to match your research needs. Amplifiers snap together and pull apart for simple substitutions. Channel number assignments are made or changed by moving a switch at the top of each amplifier, and the channel order can be changed in the software.

The MP System hardware provides a flexible tool for your research and teaching needs. The modular, powerful interface system can be used with the add on amplifiers and accessories or with equipment you already have. The newly expanded range of amplifiers further enhances your ability to create a system to suit your application requirements. Amplifiers snap together and pull apart for simple substitutions. MP Starter Systems include all hardware, software and documentation you need to get started…then you can add amplifier modules, transducers, and electrodes to match your research design.

Flexible, friendly data collection

• Intuitive software design lets you get started right away – no need to learn a new software language
• Full control over channel setup and definition
• Add and save new calculation channels (e.g., heart rate, integrated data) while collecting raw data
• Real-time digital filtering, bandpass, bandstop, low- or high-pass filtering
• Save as much data as your computer space or disk allows–AcqKnowledge has no file size limitations!
  Multiple, changeable display features
• Adjust each wave’s position, amplitude and colour
• Scope mode, histogram function, X-Y mode and Cut & paste editing
• Live time/event marker; comment markers and typed comments can be added during or after recording.

Real-time calculations and Complex analyses

• Rate, integral, derivative and other math functions can be calculated, displayed and stored in real time
• Use waveform math to transform data while recording
• Measure and display waveform data on the screen (e.g., peak-peak, BPM, S)
• Select transformation functions while recording with a mouse click!
• Fast Fourier Transformation performed easily
• Add, subtract, multiply or divide by a constant or by another waveform.
• Bring out hidden information with our powerful transformation functions
• Instantly measure waveform data directly on the screen, using pop-up menus
• Locate relative minima or maxima or convert peaks to values quickly with our easy-to-use peak detection function

1 MP100ACE High performance data acquisition unit
1 UIM100C Universal interface module
1 ACK100W AcqKnowledge software for Windows with manual
1 CBLS100 Analog and digital connection cable set (2 cables)
1 CBLSERA MP100 to computer serial connection cable
1 USB1W Windows USB adapter
1 AC100A 12V Power Transformer (specify USA or EURO power cord).

A full range of high performance differential amplifiers is available for use with the MP100 and MP150 system. These single-channel amplifiers are optimized for specific physiological signals. With the systems large dynamic range, only a few controls are necessary. To obtain more channels, just snap the modules together up to 16. All amplifiers employ user-selectable filter, offset, and gain controls. Interfacing the DA100’s 2mm pins to other transducers is easily accomplished by plugging in a TCI Adapter. All of the "C" modules now are configured for the DIN standard 1.5mm safety socket.

1 MP150ACE Ethernet-ready data acquisition unit
1 UIM100C Universal Interface Module
1 ACK100W AcqKnowledge software for Windows with electronic manual
2 CBLETH1 Ethernet cables
1 ETHSW1 Ethernet switch box
1 AC150A 12V Power Transformer (specify USA or EURO power cord).

The MP150 offers Ethernet-ready data acquisition and analysis. Record multiple channels with differing sample rates. Record at speeds up to 400 kHz (aggregate). Place one or more MP150 Systems in a local area network (LAN). Use any PC in the LAN to record from any MP150 System in the LAN. Recommended configuration: MP150 System and local area network connected to the computer’s Ethernet port via the Ethernet Switch. This configuration provides optimal performance when connecting both an MP150 System and a network to the computer. In cases where the computer has no Ethernet port, an industry standard PCI Ethernet card or adapter is required. Minimum computer requirements: PC: Ethernet Interface with Windows 98, 98SE, 2000, NT4.0, and ME. Recommended minimum RAM: 64 Mbytes. Macintosh: System 8.6 or better, RAM: 64 Mbytes. Power PC native (Power PC 601 or better required)