Optional Accessories/Replacement Parts
For use with OmniDrill35 Micro Drill
Options
| Order code | Description |
| 501850 | Abrading Tip, Rubber, 5 per pack |
| 501851 | Abrading Tip, Stone, 5 per pack |
| 501852 | Accessory Stand |
| 501853 | Ball Mill, Carbide, #1, 0.031” Diameter, 5 per pack |
| 501854 | Ball Mill, Carbide, #2, .0039” Diameter, 5 per pack |
| 501855 | Ball Mill, Carbide, #3, 0.047” Diameter, 5 per pack |
| 501856 | Ball Mill, Carbide, #4, 0.055” Diameter, 5 per pack |
| 501857 | Ball Mill, Carbide, #5, 0.063” Diameter, 5 per pack |
| 501858 | Ball Mill, Carbide, #6, 0.071” Diameter, 5 per pack |
| 501842 | Ball Mill, Carbide, #7, 0.083” Diameter, 5 per pack |
| 501860 | Ball Mill, Carbide, #1/4, 0.019” Diameter, 5 per pack |
| 501861 | Ball Mill, Carbide, #1/2, 0027” Diameter, 5 per pack |
| 501862 | Cutoff Disk, 20 per pack |
| 501863 | Mandrel, Screw, 5 per pack |
| 501864 | Mandrel, Threaded, 5 per pack |
| 504459 | Footswitch |
| 502237 | Stereotaxic Holder for OmniDrill35 Microdrill |
Benefits
- Removable nose cone that can be cleaned and sterilized
- Consistant power for the duration of its use
- Variable speeds so you control the amount of heat generated
Applications
- Grinding, finishing, cutting and drilling bone, teeth and other material
This line-powered micro drill will make easy work of grinding, finishing, cutting and drilling bone, teeth and other material. The high-torque 35,000 rpm (maximum) motor is quiet and has minimal vibration which reduces wear on the motor and provides greater comfort for you. It also features a forward and reverse switch, “E Type” handpiece and handpiece holder. The handpiece has a removable nose cone that can be cleaned and sterilized. It accepts 3/32” and 2.33mm bur shanks. Unlike battery-powered drills, this unit maintains consistent power for the duration of use. The wide range of speeds allows you to control the amount of heat generation.
The startup kit (shown below) include cutoff disks, burs, mandrel and an accessory holder stand.
The purchase of 503598 includes the start up kit.
OmniDrill35 can be mounted in the WPI stereotaxic frames as shown below.
501850
Abrading Tip, Rubber, 5/pk
- Overall length: 50.80 mm (2.00")
- Fits the P40 drill and OmniDrill system handpieces when used with threaded mandrel 501864
- Pack of 5 rubber abrading tips
501851
Abrading Tip, Stone, 5/pk
- Fine pointed, silicon carbide abrasive tip
- 3/32" shaft fits the P40 drill and OmniDrill system handpieces
- Pack of 5 stone abrading tips
501852
Accessory Stand for Drill Kit
- This stand allows you to conveniently store ball mills and accessories for micro drill systems
- Compatible with bur and drill bits that have a 3/32" shaft
501860
Ball Mill, Carbide, Bur Drill Bit #1/4, 0.5 mm Diameter, 5/pk
- 0.5 mm (0.019") carbide-tipped ball mill
- 3/32" shaft fits the P40 drill and OmniDrill system handpieces
- Pack of 5 bur drill bits
501861
Ball Mill, Carbide, Bur Drill Bit #1/2, 0.7 mm Diameter, 5/pk
- 0.7 mm (0.027") carbide-tipped ball mill
- 3/32" shaft fits the P40 drill and OmniDrill system handpieces
- Pack of 5 bur drill bits
501853
Ball Mill, Carbide, Bur Drill Bit #1, 0.8 mm Diameter, 5/pk
- 0.8 mm (0.031") carbide-tipped ball mill
- 3/32" shaft fits the P40 drill and OmniDrill system handpieces
- Pack of 5 bur drill bits
501854
Ball Mill, Carbide, Bur Drill Bit #2, 1.0 mm Diameter, 5/pk
- 1.0 mm (0.039") carbide-tipped ball mill
- 3/32" shaft fits the P40 drill and OmniDrill system handpieces
- Pack of 5 bur drill bits
501855
Ball Mill, Carbide, Bur Drill Bit #3, 1.2 mm Diameter, 5/pk
- 1.2 mm (0.047") carbide-tipped ball mill
- 3/32" shaft fits the P40 drill and OmniDrill system handpieces
- Pack of 5 bur drill bits
501856
Ball Mill, Carbide, Bur Drill Bit #4, 1.4 mm Diameter, 5/pk
- 1.4 mm (0.055") carbide-tipped ball mill
- 3/32" shaft fits the P40 drill and OmniDrill system handpieces
- Pack of 5 bur drill bits
501857
Ball Mill, Carbide, Bur Drill Bit #5, 1.6 mm Diameter, 5/pk
- 1.6 mm (0.063") carbide-tipped ball mill
- 3/32" shaft fits the P40 drill and OmniDrill system handpieces
- Pack of 5 bur drill bits
501858
Ball Mill, Carbide, Bur Drill Bit #6, 1.8 mm Diameter, 5/pk
- 1.8 mm (0.071") carbide-tipped ball mill
- 3/32" shaft fits the P40 drill and OmniDrill system handpieces
- Pack of 5 bur drill bits
501842
Ball Mill, Carbide, Bur Drill Bit #7, 2.1 mm Diameter, 5/pk
- 2.1 mm (0.083") carbide-tipped ball mill
- 3/32" shaft fits the P40 drill and OmniDrill system handpieces
- Pack of 5 bur drill bits
501862
Cutoff Disk 20/pk
- Fits the P40 drill and OmniDrill system handpieces when uses with screw mandrel 501863
- Pack of 20 micro drill cutoff disks
501863
Mandrel, Screw For Micro Drill 5/pk
- Compatible with cutoff disk 501862
- 3/32" shaft fits the P40 drill and OmniDrill system handpieces
- Pack of 5 screw mandrels
501864
Mandrel, Threaded For Micro Drill 5/pk
- Compatible with rubber abrading tips 501850
- 3/32" shaft fits the P40 drill and OmniDrill system handpieces
- Pack of 5 threaded mandrels
504459
Replacement Footswitch for 503599 MicroDrill
Request
Catalogue
Chat
Print