Permacell Multi-well Plates
96-WELL PLATES CURRENTLY IN STOCK
PermaCell 96-well cell culture insert plates are specially designed for 3D organotypic cell culture applications. The 96-well insert plate is an array of 96 membrane-bottom wells connected in a single, rigid tray. These cell culture insert plates can be used to create three-dimensional tissue cultures pertaining to your specific research needs. WPI offers EVM-EL-03-02-05 electrode (STX HTS EVOM™ Electrode for TEER in MatTek 96) ideal for this plate type.
-
PermaCell 96-well insert plates are advanced, sterile cell culture devices used for growth and differentiation of cells
-
Plates consist of an array of 96 membrane wells connected in a single, rigid tray for easier handling and feeding and to allow for high-throughput robotic processing
-
96-well insert plate fits within a 96-well receiver plate (included) which allows for individual treatment and assaying of each well in the plate (right)
-
PermaCell insert plates can be used for cell culture and cell differentiation into 2D/3D tissues, drug transport/permeability studies, and are easily adaptable to TEER measurements and other analytical techniques
-
96-well insert plates connect in a single, rigid tray
-
Pore size of 0.4 µm
-
Large access ports for efficient media sampling
-
Robotics and TEER compatible
-
Large access ports to allow for efficient media sampling
- Each unit includes the 96-well insert plate, 96-well reservoir plate, and lid
NOTE: WPI is an authorized distributor of MatTek for the 96-well cell culture insert plates.
Options
| Order code | Description | Package of |
| CCI96-PET-0.4 | PermaCell Cell Culture Insert Plates, 96-well, PET, 0.4 µm | Package of 1 |
| CCI96-PET-0.4-5 | PermaCell Cell Culture Insert Plates, 96-well, PET, 0.4 µm, Pack of 5 | Package of 5 |
Plate Setup
It is best to perform these steps in a laminar flow hood or equivalent controlled environment. The inserts are pre-packaged in a 96-well receiver plate. Be sure to inspect the wells to ensure there are no defects before you begin.
- Add cell culture media to the wells of the 96-well receiver plate. For MatTek 96-well insert plates, add 300 µL of medium into the wells of the receiver plate.
- Seed cells into the wells of the insert plate and follow the standard tissue culture incubation and feeding procedures for optimal cell growth. Typical experiments seed cells on the apical membrane using up to 100 µL in the apical compartment. Experiments may also include seeding cells into the receiver plate wells and/or onto the basal side of the membrane.
NOTE: For taking TEER measurements, the STX HTS EVOM™ Electrode (EVM-EL-03-02-05 ) performs optimally with 350 µL of cell culture medium in the basolateral compartment and 150 µL of cell culture medium in the apical compartment.
Once insert plates are opened, plates cannot be returned for a refund.
WPI is an authorized distributor of MatTek PermaCell insert plates.
| Type | Description |
| Dimensions | 96-well Insert Plate |
| Reciever Plates | 127.8 x 85.5 mm |
| Well Depth | 12 mm |
| Membrane Diameter | 4.29 mm |
| Membrane Area | 0.11 cm2 |
| Memrane Pore Size | 0.4 μm |
| Solvent Compatibility | Same as Polystyrene |
| Sterility | Gamma Irradiation, Shipped Sterile |
| Membrane Types | Transparent Polyethelyene Terephthalate (PET) |
| Weight | 0.1 lbs. |
| Dimensions | 5 × 4 × 1 in. (12.7 x 10.2 x 2.5 cm) |
EVM-SYS-01-01-02
EVOM™ Manual, HTS STX, 96-well Plate (5 Plates)
Complete system - save over €1500
Includes:
- EVOM™ MANUAL
- STX HTS Electrode
- PermaCell Insert Plate (5 plates with system)
EVM-SYS-01-01-01
EVOM™ Manual, HTS STX, 96-well Plate (1 Plate)
Complete system - save over €1000
Includes:
- EVOM™ MANUAL
- STX HTS Electrode
- PermaCell Insert Plate (1 plate with system)
CCI96-PET-0.4
PermaCell Cell Culture Insert Plates, 96-well, PET, 0.4 µm pore size, 1x108 pores/cm² density, pack of 1.
CCI96-PET-0.4-5
PermaCell Cell Culture Insert Plates, 96-well, PET, 0.4 µm pore size, 1x108 pores/cm² density, pack of 5
Request
Catalogue
Chat
Print